Shanghai Lorderan Scientific Instrument Co., Ltd.
Main products:Support For Magnetic Stirrer,Temperature Sensor,Vacuum Tube For Blood,Cover For Magnetic Stirrer,Electrode For PH Meter
Contact Us
  • Contact Person : Mr. Zhang Jimmy
  • Company Name : Shanghai Lorderan Scientific Instrument Co., Ltd.
  • Tel : 86-21-51159001, 60891036
  • Fax : 86-21-60891036
  • Address : Shanghai,Shanghai,Room 133, Section C, Bldg. 8, No. 152, Xiaodong Street, Jiading Industrial Zone
  • Country/Region : China
  • Zip : 201318

Pen Type Waterproof Conductivity Tester

Pen Type Waterproof Conductivity Tester
Product Detailed
ECSCAN series waterproof pocket conductivity/oC tester are used to measure electrical conductivity and temperature value.

Single Point Push-Button Calibration: ECSCAN series with single point calibration function. The meter is permitted to use standard conductivity solution, you need only set conductivity value of the calibration solution at 25oC and immerse conductivity electrode into conductivity solution, then press [ CAL ] key, the meter will be calibrated automatically. 

Hold Function: When measure the sample solution, you need freeze reading temporarily for ease of recording. Waiting for a stable reading, press [ HOLD ] key, then the meter will hold the value. 

Replaceable Electrode:ECSCAN series with platinum sensor, giving you quick, reliable conductivity measurement. Double junction sensor, you can replace it easily. 

Automatic Temperature Compensation: ECSCAN series with temperature sensor, you can view temperature through [oC ] key. The meter with automatic temperature compensation for accurate reading under changing conditions.


Auto-Power Off:The meter will turn itself off approximately 8 minutes after last key pressed, it saves battery power after non-use. Waterproof Function:The meter with good waterproof performance, It can float when sink in water.


    Conductivity Range0.0~199.9uS/cm0~1999uS/cm0.00~19.99mS/cm
    Conductivity Accuracy±1% F.S±1% F.S±1% F.S
    Temperature Range0~80oC  
    Temperature Accuracy±1oC  
    Temperature Compensation0~50oC, Automatic
    Calibration Points2 Points
    Calibration Solutions146.6uS/cm1408uS/cm12.85mS/cm
    Temperature Coefficient2%/oC
    Auto-Off8 minutes after last key pressed
    Operating Temperature0~60oC
    Power Requirements3×1.5V alkaline button cell batteries
    Battery LifeApprox. 150 hours of continuous use

Pen Type Waterproof Conductivity Tester

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.